1. Pressure range :CLASS 150Lb~1500Lb2. Nominal diameter : NPS 1/2-40"3. Body material:A105、LF2、F304、F316、F304L、F316L、F51,WCB、LCB、WCC、CF8、CF8M、CF3、CF3M、A890 4A etc.
To grind shock absorber piston rod and bearing, you’ll need fine sulphur oil stones with low temperature bond agent. Soft and not easy to fall off, the oil stones for grinding shock absorber can meet high surface finish requirement and deal with enough wo
The Welding neck flanges is normally referred to as the high hub flange. It is designed to transfer stresses to the pipe, thereby reducing high stress concentrations at the base of the flange.
The screw anchor head flight dimension is 250mm, holding strength 160KN. You can install it under a boom suspended torque motor line truck or rack type digger truck, the ground screw anchor can through class 2 soils.
1. Application : Plumbing services ,Sanitary system ,Waterworks ,Steam, gasoline networks ,Heating plants2. Advantage :Durability,Easy to install ,Perfect finish3. About this items as below description
1. TOP QUALITY - Specially designed for dry soft and hard wood, also for sawing chipboard, MDF, blockboard cutting2. LONG LIFE - According to the test results, our blade enables to make continuously working more thans 3 ours, the blade will not be deforme
We supply high quality weld nuts, including hex weld nut DIN929, square weld nuts DIN928, round weld nuts, hex flange weld nuts and special weld nuts according to customer’s drawing. Usually, the surface finishing for weld nuts is plain, but some customer
Used for 115mm angle grinder, used for cutting stainless steel and other metals. A sufficiently sharp speed can reduce dust and noise during use, which means less damage and discoloration of the cut material.
The 15 Degree 2-1/2″ Coil Siding Nailer is ideal for fastening all types of trim and molding. The tool-less depth adjustment function can precisely control the depth of the nails to achieve the best tightening control.
SYI can supply Flanged Pipe Fittings PN10, PN16, PN25 or PN40 drilling in accordance with ISO 7005-2/EN1092-2, from DN80 to DN2000, with the coating of Zinc and Black Bitumen coating, Red/Blue Epoxy coating, or PU (polyurethane) coating.
RIVET NUTS also known as rivet nuts, pull cap, includes rivet nuts with flat head with blind hole, rivet nuts with full hex shank, rivet nuts with semi-hex shank, rivet nuts with small CSK head, rivet nuts with square shaped flat head, elevator rivet nuts